Vermicomposting of source-separated human faeces for nutrient recycling

The present study examined the suitability of vermicomposting technology for processing source-separated human faeces. Since the earthworm species Eisenia fetida could not survive in fresh faeces, modification in the physical characteristics of faeces was necessary before earthworms could be introduced to faeces. A preliminary study with six different combinations of faeces, soil and bulking material (vermicompost) in different layers was conducted to find out the best condition for biomass growth and reproduction of earthworms. The results indicated that SVFV combination (soil, vermicompost, faeces and vermicompost – bottom to top layers) was the best for earthworm biomass growth indicating the positive role of soil layer in earthworm biomass growth. Further studies with SVFV and VFV combinations, however, showed that soil layer did not enhance vermicompost production rate. Year-long study conducted with VFV combination to assess the quality and quantity of vermicompost produced showed an average vermicompost production rate of 0.30 kg-cast/kg-worm/day. The vermicompost produced was mature as indicated by low dissolved organic carbon (2.4 ± 0.43 mg/g) and low oxygen uptake rate (0.15 ± 0.09 mg O₂/g VS/h). Complete inactivation of total coliforms was noted during the study, which is one of the important objectives of human faeces processing. Results of the study thus indicated the potential of vermicomposting for processing of source-separated human faeces.     

Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

Effect of alcohol use on accelerating and braking behaviors of drivers

Objective: The present study examines the accelerating and braking behaviors of drivers at different blood alcohol concentrations (BACs) in heterogeneous driving conditions using driving simulator experiments.

Methods: Eighty-two licensed drivers performed simulated driving in a rural road environment designed in the driving simulator at 4 BAC levels: 0.00, 0.03, 0.05, and 0.08%. Driving performance was analyzed using vehicle control variables such as mean acceleration and mean brake pedal force. Generalized linear mixed models were developed to quantify the effect of different alcohol levels and explanatory variables such as driver’s age, gender, and other factors on the driving performance indicators.

Results: Alcohol use was reported as a significant factor affecting the accelerating and braking performance of drivers. The acceleration model results indicated that drivers’ mean acceleration increased by 0.013, 0.026, and 0.027 m/s² for BAC levels of 0.03, 0.05, and 0.08%, respectively. Results of the brake pedal force model showed that drivers’ mean brake pedal force increased by 1.09, 1.32, and 1.44 N for BAC levels of 0.03, 0.05, and 0.08%, respectively. Age was a significant factor in both the models where a 1-year increase in driver age resulted in a 0.2% reduction in mean acceleration and a 19% reduction in mean brake pedal force. Driving experience could compensate for the negative effects of alcohol to some extent while driving.

Conclusions: The findings of the present study revealed that drivers tend to be more aggressive and impulsive under the influence of alcohol, which deteriorates their driving performance. Impairment in accelerating and braking behaviors of drivers under the influence of alcohol leads to increased crash probabilities. The conclusions may provide reference in making countermeasures against drinking and driving and contribute to traffic safety.     

Metal toxicity and natural antidotes: prevention is better than cure

Environmental Science and Pollution Research - Toxicity due to heavy metals (HM), specifically mercury (Hg), arsenic (As), lead (Pb), and cadmium (Cd) remains a challenge to scientists till date....     

Concentration and recovery of coliphages from water with bituminous coal.

Coliphages represent a process indicator for fecal pollution. The coal bed concentration method prepared for enterovirus was refined for a concentration of coliphages. A bed made from 1.5 g of 120-mesh coal powder was used for concentrating coliphage from 200 mL of a water sample with or without the addition of aluminum chloride at different pH values. The isolated E. coli strain EC-R8 was found to be more susceptible to the desired coliphage and showed significant coliphage-coliform response, with clear plaque used for further studies. The complete coliphage adsorption was achieved with the addition of 0.0005 M AlCl3 at pH 6.0. Adsorbed coliphages were eluted with 3% beef extract in Mcllvaine buffer at pH 7.1, with an average recovery of 78.74%. This concentration technique was applied for the detection of coliphages from the well water of Nagpur city (India) and found to contain coliphages in the range of 2 to 28 plaque-forming units per liter (PFU/L).     

Matrix Diffusion Modeling Applied to Long‐Term Pump‐and‐Treat Data: 1. Method Development

Despite the installation in the 1980s and 1990s of hydraulic containment systems around known source zones (four slurry walls and ten pump‐and‐treat systems), trichloroethene (TCE) plumes persist in the three uppermost groundwater‐bearing units at the Middlefield‐Ellis‐Whisman (MEW) Superfund Study Area in Mountain View, California. In analyzing TCE data from 15 recovery wells, the observed TCE mass discharge decreased less than an order of magnitude over a 10‐year period despite the removal of an average of 11 pore volumes of affected groundwater. Two groundwater models were applied to long‐term groundwater pump‐and‐treat data from 15 recovery wells to determine if matrix diffusion could explain the long‐term persistence of a TCE plume. The first model assumed that TCE concentrations in the plume are controlled only by advection, dispersion, and retardation (ADR model). The second model used a one‐dimensional diffusion equation in contact with two low‐permeability zones (i.e., upper and lower aquitard) to estimate the potential effects of matrix diffusion of TCE into and out of low‐permeability media in the plume. In all 15 wells, the matrix diffusion model fit the data much better than the ADR model (normalized root mean square error of 0.17 vs. 0.29; r² of 0.99 vs. 0.19), indicating that matrix diffusion is a likely contributing factor to the persistence of the TCE plume in the non‐source‐capture zones of the MEW Study Area's groundwater‐extraction wells. © 2013 Wiley Periodicals, Inc.     

Coupling between meteorological factors and ambient aerosol load

The coarser (CPM) and respirable (RPM) fractions of aerosol loads collected in a time sequence, during the onset of winter season in Delhi region, were subjected to Principal Component Analysis (15 elemental variables, 39 samples); the absolute mass contributed by each identified source to the CPM and RPM was quantified by using Absolute Principal Component Score (APCS) and Positive Matrix Factorization (PMF) method. Interestingly, the mass contributed by the local crustal source (material) to both fractions manifested undulating periodic behavior, a dominating harmonic corresponding to 24-h period was detected by using Discrete Fourier Transform (DFT). The corresponding harmonics, of varying strengths, were also detected in the recorded meteorological factors: Planetary Boundary Layer (PBL), Surface Level Temperature (T), Surface Level Relative Humidity (RH) and Wind Speed (WS). The analysis of the respective harmonic strength within the CPM, RPM, and meteorological factors suggested that the undulation observed in both size fractions of aerosol load from the local crust was affected by the meteorological factors. The large proportion of undulating loads (CPM and RPM), explained by the dominating harmonic, was fully accounted for by the empirical relation involving the discrete coupling parameters, and the recorded meteorological factors: PBL, T, RH and WS. The analysis suggests that the magnitude and the direction (‘positive’ load increase and ‘negative’ the reverse) of coupled meteorological factors'(s) effect on ambient CPM, RPM load is determined by the phase difference between the harmonic explaining the aerosol fraction's load and the corresponding harmonic present in the respective meteorological factor. The absolute mass contributions arising from the identified sources (APCS and PMF) allowed us to calculate the baseline ambient concentrations of undulating CPM and RPM loads, in the region of this study, affected by meteorological factors only.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Non-timber forest products certification in India: opportunities and challenges

Forest certification has emerged as a marketing tool for linking the good forest management practices with the environmentally conscious consumers. Its genesis can be attributed to the society’s concern for the social and environmental significance of forests. Forest management certification when coupled with the chain-of-custody certification; then, the supply chain stages for such forest products can carry an ecolabel. Non-timber forest products (NTFPs) are of socio-economic and cultural importance for the forest dwelling communities, particularly for the tropical countries like India. India is home to an amazing diversity of plants, with over 46,000 plant species recorded to occur there. NTFP’s availability, utilization, commercialization, exploitation, management practices, policies and tenure systems in different parts of India have high diversity and variability. There is concern, however, that collection methods for most of NTFP species are destructive and wild populations are declining as a result. Thus, the harvest of NTFPs is coming under increasing scrutiny from certification programmes, as it plays a key role in the sustainable management of forest resources and community benefit worldwide. Thus, the present research paper highlights the issues relevant to certification of NTFPs in India, based on more than a decadal experience in dealing with this subject at Indian Institute of Forest Management, Bhopal.     

Enrichment of vermicomposts prepared from cow dung spiked solid textile mill sludge using nitrogen fixing and phosphate solubilizing bacteria

Textile mill waste can be vermicomposted if it is mixed in the range of 20–30% with cow dung. This article reports the effect of inoculation, of nitrogen fixing Azotobacter chroococcum strain; Azospirillum brasilense strain and phosphate solubilizing Pseudomonas maltophila, on nitrogen and phosphorus content of vermicomposts prepared from cow dung (CD) and cow dung spiked textile mill sludge (CD + STMS). The CD vermicompost was more supportive to the growth and multiplication of all the three bacteria than CD + STMS vermicompost. In Azotobacter chroococcum treated vermicomposts maximum nitrogen content was recorded between 45 and 60 days [CD␣vermicompost (25.9 ± 0.45 g kg⁻¹) and CD + STMS vermicompost (20.6 ± 0.62 g kg⁻¹)] followed by Azospirillum brasilense inoculation [CD vermicompost (19.4 ± 0.60 g kg⁻¹) and CD + STMS vermicompost (18.6 ± 0.17 g kg⁻¹)]. Phosphorus content in Pseudomonas maltophila inoculated CD vermicompost was 20.8 ± 0.20 g kg⁻¹ and CD + STMS vermicompost was 13.4 ± 0.45 g kg⁻¹ after 75th day of inoculation.